Barker Snaps Lite 3/8" 31857

Barker Manufacturing Snaps Lite

Snaps Lite, Fits 2-1/2” Square 5th Wheel Legs: 3/8” Dia. Pin, 1lb.,For 7/16” diameter holes

SNAPS LITE are spring loaded pins that permit you to hook-up or un-hook your 5th Wheel in less than two minutes. No longer do you have to kneel down in the mud, rain, and dirt to get that darn clevis pin in place. Snaps have eliminated the hard part of the job. Engage and disengage the heavy-duty steel pin with one hand.

• Strong as the original all-steel Snaps

• Install in minutes... no tools required

• Lifetime unconditional guarantee

1. Block tires so 5th Wheel cannot move either direction.

2. Hitch-up to truck so 5th Wheel legs are free of load.

3. Remove existing pin and place Snaps Lite around leg.

4. Pull plunger and position pin.

5. Permit spring to push pin through holes in both sides of leg.

6. Snap hinged brackets together and lock in place.

7. Repeat operation on other leg and remove RV from truck to put load on legs.

8. Test operation of Snaps Lite and you’re set to go!

MFG# 31857 UPC# 755220318571